Your version of safari seems to be too old and may cause Dip switches, live demo not to work as we wish in Safari.

Update your browser or choose a different one,  eg Firefox.

Settings adjusted with DIP switches

Prisma Button’s settings are easily adjusted with DIP switches. These are simple to understand for anyone with technical knowledge – such as an assembler or an installer.

Facts about DIP switches

• There 8 DIP switches on the circuit card.
• They are all deactivated when delivered.
• You can activate multiple DIP switches at the same time, depending on which function you want to activate.

Live demonstration

Down below, there is a live demo of all the different functions. Choose any model you wish to try, and the functions you wish to explore by clicking on “Select function”. Once you have chosen a function, the dip-switches will be activated. Underneath the demo, there are instructions explaining each function.

Sorry, your browser does not support inline SVG.

Choose model

Dip_switch 1: on
•Instant push

  • When delivered – All 8 DIP switches are set in OFF mode
    Which means: Push activates relay 1 = “locking mechanism” after 0,2 sec activates relay 2 = door opening.
  • You can activate several DIP switches depending on the requested functions.
    Note! DIP switch “Extended push” and “Nurse Bed” cannot be activated at the same time.

Press and hold the push front for 1.5 seconds to activate
DIP switch 1: ON
Note! If DIP switch 8 is set ON this function will be deactivated

Press and hold the push front for 3 seconds to activate.
DIP switch 2: ON
Note! If DIP switch 8 is set ON this function will be deactivated

Press and hold the push front for 6 seconds to activate.
DIP switch 1 and 2: ON
Note! If dip-switch 8 is set ON this function will be deactivated.

Kick-function means the active violence protection will be deactivated and stronger pushes/kicks will be accepted.
Dip-switch 3: On

You can choose the option of a relay connecting time for max 1 second.
It will only receive one signal no matter the pressure time on the push front.
DIP switch 4: ON

When you press the push front there will be a notification sound.
DIP switch 5: ON

Can be used to control the locking mechanisms when the signal to the door opening needs to be delayed by 1,5 seconds.
The function can also be used if you want unsynchronized opening of double doors.
Short press
activates relay 1, “locking mechanism”.
Press 1,5 seconds
activate relay 1, “locking mechanism” directly.
When pressed for 1,5 seconds, relay 2, “door” is also activated.
DIP switches 2 and 8: ON

Deactivate relay 2, not relay 1
DIP switch 6: ON

Deactivate relay 1, not relay 2
DIP switch 7: ON

Control the pair doors in different ways, depending the pressure on the push front.
Direct push: activate relay 1, “Door 1”
Extended push 1.5 seconds activate relay 2, “Door 2”.
DIP switch 8: ON

Control pair doors in different ways depending the pressure on the push front.
Direct push: activate relay, 1 “Door 1”
Extended push 1.5 seconds activate relay 1+2, “Door 1” and “Door 2”.
DIP switch 1 and 8: ON