Compare features: Large, Medium and Small

Android app provided by PrismaTibro is the platform which is necessary to make changes and activate more functions.
The programming is done by an Android-App and transferred via NFC or through a USB flash drive.
Simply start a new configuration file or open an existing configuration file, then change, save, copy and send as preferred.

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2240•M Tram
2250•M Walk & Bike

A microphone continuously measuring the traffic noise level around the device, adjusting the sound level to make sure that the sound is audible but less disturbing.
Prisma Daps 2000 is smart enough to know in which sound frequency to increase the sound.
Adjustable in level of 1 dB over ambient noise, from -15dB to +15dB.
Individually set for all phases even for internal as well as external loudspeaker.

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2240•M Tram
2250•M Walk & Bike

For intersections with an intensive traffic, wide streets with several lanes, it is recommended to connect an external loudspeaker.
All Prisma Daps 2000•L and Prisma Daps 2000•M-series can be equipped with external loudspeaker: Prisma Daps ES-400.
Requirements
To be installed at 2.5 meters above the ground facing opposite side of the street.
Prisma Daps should be supplied with 10- or 13-wire cabling.

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2240•M Tram
2250•M Walk & Bike

Tick-tick-tick…
A great help for pedestrians to locate the Prisma Daps push button and it gives info about the status of the intersection.
Following the locating sound from opposite side, the pedestrian can cross the street safely.
Recommended sound for Prisma Daps Walk models:
Prisma_Sound_05 – CLICK HERE to listen
• 16 standard locating sounds.
• Pulse frequency 30 ppm–750 ppm
• Not mistakable with other sounds in the urban environment
• Minimum disturbance for neighbors
• Individually set for all phases

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2250•M Walk & Bike

Recommended sound for Prisma Daps Tram model
CLICK HERE to listen
• Pulse frequency 70 ppm

Available for the following model
2240•M Tram

The Settings and configuration file are transferred to Prisma Daps 2000•L via Near Field Communication (NFC).
Recommended: Android Smartphone or Android Tablet.

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time

More options to program sound, light and functions for different times of the day.

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2240•M Tram
2250•M Walk & Bike

Relief symbols and direction tactile arrow
A tactile map which provides the visually impaired pedestrians with information on the exact condition of the crosswalk to be crossed.
• The symbols are always arranged in the direction from bottom to top
• Always placed facing the walkway
• Delivered with 7 different symbols as puzzle pieces.

Tactile arrow
• The tactile arrow shows the direction of the crosswalk.
• Supplied with single and double arrow.

A description about the meaning of the symbols and direction arrows are available in the packaging.

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2250•M Walk & Bike

All Prisma Daps 2000•L series are supplied with NFC antenna which makes the communication possible with RFID.
Order RFID-tags and program up to 16 tag groups for different functions and geographical areas.
Even different functions can be programmed.

RFID tags can be activated for different functions:
• Extended time for green light
• Sound and Light Notification
• Higher sound volume
• Spoken messages
• Set up a different locating sound

Note!
RFID for Prisma Daps 2000•L is high frequency and not backward compatible to previous series Prisma Daps 1000 or Prisma Daps TS-900 which used with low frequency RFID. That’s why to match both Prisma Daps 1000 and Prisma Daps 2000•L-series.
RFID combi-tag can be selected which is a combination of both high and low frequencies.
Recommended: Minimum 8-wire cable.

Available for
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time

Prisma Daps 2000•M and Prisma Daps 2000•L has 16 standard locating sounds and the possibility to record and upload sounds.
• Min and Max from 30-87dB, adjustable in steps of 1 dB.
• Prisma Sound No. 5, audible in ambient traffic noise up to 105dB
• The sound level is individually set for all phases and for internal as well as external loudspeakers.
• Sound frequency 180-7000Hz.

Listen
CLICK HERE to listen to Prisma Daps original sound.

From factory
• Pre-recorded sound set from factory
Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2240•M Tram
2250•M Walk & Bike

Change on site
Record and upload your own sounds after delivery from the factory.

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time

Prisma Daps 2000•L
Got the spoken messages feature.
Supplied with pre-recorded message and via Android app you can record your own message and easily switch to the new via USB flash drive or NFC communication.

Prisma Daps 2000•M
Supplied with a pre-recorded message from PrismaTibro.

Examples of user application
• Warning messages
• Emergency vehicle
• Roadwork
• Tourist information
• … and more…

Pre-recorded messages set from factory available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2250•M Walk & Bike

Record your own message available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time

Programming is done with an Android app, the settings are transferred to Prisma Daps via USB flash drive.
The USB-port is placed behind the protective LED lens in the front.
For Prisma Daps 2000•L
the configuration file is transferable either by NFC antenna or USB flash drive.
For Prisma Daps 2000•M
the configuration file is transferable only by USB flash drive.
USB flash drive is an option provided by PrismaTibro.

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2240•M Tram
2250•M Walk & Bike

Vibrator with or without push function
Vibrator for both versions are placed at the bottom lid.
The vibrator pulse frequency is 0-750 ppm.
There is a distinct change in the vibrator pulse rate when changing from red to green, to be easier for pedestrians to know that the green phase is active.
WITHOUT the push function
The vibrator is placed at the bottom lid.
It’s known as “Vibrator plate with tactile dots”

Available for the following models
2100•L Walk
2120•L Time

WITH the push function
Vibrator in combination with a push function.
It’s known as “Vibrator plate with a pressure button”.
The push function gives the same notification as the push front does, but it can also be programmed with other optional functions.
Examples of features linked to push function:
• Higher sound
• Spoken messages
• Extended time for green light

Available for the following models
2110•L Walk
2130•L Time

Possible to program “Error” sound/light or activate a spoken message with push function.
For example: “Intersection is out of order”

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2240•M Tram
2250•M Walk & Bike

Android app provided by PrismaTibro is the platform which is necessary to make changes and activate more functions.
The programming is done by an Android-App and transferred via NFC or through a USB flash drive.
Simply start a new configuration file or open an existing configuration file, then change, save, copy and send as preferred.

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2240•M Tram
2250•M Walk & Bike

A microphone continuously measuring the traffic noise level around the device, adjusting the sound level to make sure that the sound is audible but less disturbing.
Prisma Daps 2000 is smart enough to know in which sound frequency to increase the sound.
Adjustable in level of 1 dB over ambient noise, from -15dB to +15dB.
Individually set for all phases even for internal as well as external loudspeaker.

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2240•M Tram
2250•M Walk & Bike

For intersections with an intensive traffic, wide streets with several lanes, it is recommended to connect an external loudspeaker.
All Prisma Daps 2000•L and Prisma Daps 2000•M-series can be equipped with external loudspeaker: Prisma Daps ES-400.
Requirements
To be installed at 2.5 meters above the ground facing opposite side of the street.
Prisma Daps should be supplied with 10- or 13-wire cabling.

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2240•M Tram
2250•M Walk & Bike

Tick-tick-tick…
A great help for pedestrians to locate the Prisma Daps push button and it gives info about the status of the intersection.
Following the locating sound from opposite side, the pedestrian can cross the street safely.
Recommended sound for Prisma Daps Walk models:
Prisma_Sound_05 – CLICK HERE to listen
• 16 standard locating sounds.
• Pulse frequency 30 ppm–750 ppm
• Not mistakable with other sounds in the urban environment
• Minimum disturbance for neighbors
• Individually set for all phases

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2250•M Walk & Bike

Recommended sound for Prisma Daps Tram model
CLICK HERE to listen
• Pulse frequency 70 ppm

Available for the following model
2240•M Tram

More options to program sound, light and functions for different times of the day.

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2240•M Tram
2250•M Walk & Bike

Relief symbols and direction tactile arrow
A tactile map which provides the visually impaired pedestrians with information on the exact condition of the crosswalk to be crossed.
• The symbols are always arranged in the direction from bottom to top
• Always placed facing the walkway
• Delivered with 7 different symbols as puzzle pieces.

Tactile arrow
• The tactile arrow shows the direction of the crosswalk.
• Supplied with single and double arrow.

A description about the meaning of the symbols and direction arrows are available in the packaging.

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2250•M Walk & Bike

Prisma Daps 2000•M and Prisma Daps 2000•L has 16 standard locating sounds and the possibility to record and upload sounds.
• Min and Max from 30-87dB, adjustable in steps of 1 dB.
• Prisma Sound No. 5, audible in ambient traffic noise up to 105dB
• The sound level is individually set for all phases and for internal as well as external loudspeakers.
• Sound frequency 180-7000Hz.

Listen
CLICK HERE to listen to Prisma Daps original sound.

From factory
• Pre-recorded sound set from factory
Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2240•M Tram
2250•M Walk & Bike

Change on site
Record and upload your own sounds after delivery from the factory.

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time

Prisma Daps 2000•L
Got the spoken messages feature.
Supplied with pre-recorded message and via Android app you can record your own message and easily switch to the new via USB flash drive or NFC communication.

Prisma Daps 2000•M
Supplied with a pre-recorded message from PrismaTibro.

Examples of user application
• Warning messages
• Emergency vehicle
• Roadwork
• Tourist information
• … and more…

Pre-recorded messages set from factory available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2250•M Walk & Bike

Record your own message available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time

Programming is done with an Android app, the settings are transferred to Prisma Daps via USB flash drive.
The USB-port is placed behind the protective LED lens in the front.
For Prisma Daps 2000•L
the configuration file is transferable either by NFC antenna or USB flash drive.
For Prisma Daps 2000•M
the configuration file is transferable only by USB flash drive.
USB flash drive is an option provided by PrismaTibro.

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2240•M Tram
2250•M Walk & Bike

Possible to program “Error” sound/light or activate a spoken message with push function.
For example: “Intersection is out of order”

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2240•M Tram
2250•M Walk & Bike

Applies to Prisma Daps 2300•S
For the larger models – Prisma Daps 2000•L and Prisma Daps 2000•M – an Android app is used to carry out the required settings.
The smallest model in the series – Prisma Daps 2300•S – is programmed using dip switches.

Programming with dip switches
8 dip switches on the motherboard makes it possible to adjust the settings for the Prisma Daps 2300•S.
Instructions can be found in the manual or – CLICK HERE.

Available for the following models
2310•S Walk
2315•S Walk
2320•S Bike
2325•S Bike
2330•S Walk & Bike
2335•S Walk & Bike

Common features

Housing Colour
• Blue anodized
• Gold anodized
• Yellow varnished
• Gray varnished
• Black varnished
– Other colours on request

Push front
• Blue anodized
• Black anodized

Shape
On the side of Prisma Daps 2000•L and Prisma Daps 2000•M there is a space to insert relief symbols or decorative profiles.

Decorative profiles & Decorative front

• Gold anodized
• Blue anodized
• Yellow varnished
• Gray varnished
• Black varnished
• Aluminium anodized

Relief symbols
• Yellow Polycarbonate

Missing something?
Let us know if you have a colour/combination we did not list here.
CLICK HERE for contact.

Prisma Daps 2000•L
Prisma Daps 2000•M
Constant power supply
The choice can be done upon ordering and in combination with Control I/O and Lamp I/O.
• 18-24V AC/DC
• 28-49V AC/DC
• 100-170V AC
• 150-240V AC

Standard cabling 8- or 13-wire for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time

Standard cabling 6- or 8-wire for the following models
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2240•M Tram
2250•M Walk & Bike

Prisma Daps 2300•S, 24 V DC

Powered directly from a separate power source or through the red lamp.
Standard supplied with a 6-wire cable.

Prisma Daps 2300•S, 230 V AC
Powered directly from a separate power source or through the red lamp.
Standard supplied with a 4 – or 5-wire cable and voltage adapter.
The voltage adapter converts the intersection’s/plant’s operating voltage down to 24 V DC which is Prisma Daps 2300•S series operating voltage.

Cabling
• 4-wire cable – Error detection
• 5-wire cable – Error detection and signal to the traffic controller
• 6-wire cable – Error detection and signal to the traffic controller

Available for the following models
2310•S Walk
2315•S Walk
2320•S Bike
2325•S Bike
2330•S Walk & Bike
2335•S Walk & Bike

Note! Customized cabling on request
Prisma Daps 2000•L
with LED light ring

Prisma Daps 2000•M
with LED light ring
Height x Width x Depth
284 x 112 x 125 mm
Diameter to fit the pole
114 mm
Weight
≈ 2,5 kg
Models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2220•M Time
2230•M Time
2250•M Walk & Bike
Prisma Daps 2000•L
without LED light ring

Prisma Daps 2000•M
without LED light ring
Height x Width x Depth
274 x 112 x 125 mm
Diameter to fit the pole
114 mm
Weight
≈ 2,5 kg
Models
2210•L Walk
2230•L Time
2240•L Time
Prisma Daps 2300•S
with LED light ring
Height x Width x Depth
263 x 96 x 45 mm
Diameter to fit the pole
114 mm
Weight
≈1,3 kg
Modeller
2310•S Walk
2320•S Bike
2330•S Walk & Bike
Prisma Daps 2300•S
without LED light ring
Height x Width x Depth 
253 x 96 x 45 mm
Diameter to fit the pole
114 mm
Weight
≈1,3 kg
Models
2315•S Walk
2325•S Bike
2335•S Walk & Bike

 

Prisma Daps 2000•L and Prisma Daps 2000•M can detect internal errors and report them to the traffic controller in case of any failure.
Activated in the configuration file and created by Prisma Daps App 2.7
Compatible firmware 2.7.0.0 or higher. Recommended: Minimum 8-wire cable.

The following components can be monitored on Prisma Daps 2000•L

  • Microphone
  • Loudspeaker
  • Vibrator
  • Watchdog
  • Power supply to motherboard
  • Relay 1
  • Relay 2
  • NFC
  • Push Front
  • Red and Green lamp always ON
  • Red and Green lamp always OFF

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time

The following components can be monitored on Prisma Daps 2000•M

  • Microphone
  • Loudspeaker
  • Watchdog
  • Power supply to motherboard
  • Relay 1
  • Relay 2
  • Push Front
  • Red and Green lamp always ON
  • Red and Green lamp always OFF

Available for the following models
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2240•M Tram
2250•M Walk & Bike

Prisma Daps 2300•S with 4-wire cable
Activates the red error-LED light in front in case of an error.
Troubleshooting
CLICK HERE for more detailed instructions.

Available for the following models
2310•S Walk
2315•S Walk
2320•S Bike
2325•S Bike
2330•S Walk & Bike
Prisma Daps 2300•S with 5-wire cable

Activates error signaling with relay 2 during green phase. Also activates that the red error-LED light in front turns on while an error is detected.
Troubleshooting
CLICK HERE for more detailed instructions.

Available for the following models
2310•S Walk
2315•S Walk
2320•S Bike
2325•S Bike
2330•S Walk & Bike

G

• IP56
• IK10
• Class II, double insulated

Applies to the following models
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2240•M Tram
2250•M Walk & Bike
2310•S Walk
2315•S Walk
2320•S Bike
2325•S Bike
2330•S Walk & Bike
2335•S Walk & Bike

• IK08
• Class II, double insulated

Applies to the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time

The LED lens in the front gives you a notification light as a response to your demand.

Light Character
Standard: Yellow. Optional: Cold white

Red error light
Activates a red error-LED light in front in case of an error.

Customized text is possible
The protection Lens over the LED in front can be supplied with a customized text on it.
For example:” Wait”

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2250•M Walk & Bike
2310•S Walk
2315•S Walk
2320•S Bike
2325•S Bike
2330•S Walk & Bike
2335•S Walk & Bike

Adjustable light intensity from 25-100%

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2250•M Walk & Bike

The wide LED light ring of the Prisma Daps gives light notification as a response to your demand.
LED light ring for increased visibility at long distance.
Visibility 270° horizontal angle.
Possible options
• Notification light – different options available.
• Constant light or the light ring turns on while pushing the front.
Light Character
Standard: Yellow. Optional: Cold white

Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2220•M Time
2250•M Walk & Bike
2310•S Walk
2320•S Bike
2330•S Walk & Bike

Adjustable light intensity from 25–100%.
Available for the following models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2220•M Time
2250•M Walk & Bike

Prisma Daps gives you a notification after pushing the front which is a receipt of your demand in a form of sound – Beep.
It can be turned off.

Available for the following models
2100•L Walk
2110•L Walk
2210•M Walk
2250•M Walk & Bike
2310•S Walk
2315•S Walk
2320•S Bike
2325•S Bike
2330•S Walk & Bike
2335•S Walk & Bike

Models
2310•S Walk
2315•S Walk
2320•S Bike
2325•S Bike
2330•S Walk & Bike
2335•S Walk & Bike
1W when inactive
2W with demand
Models
2100•L Walk
2110•L Walk
2120•L Time
2130•L Time
2200•M Walk
2210•M Walk
2220•M Time
2230•M Time
2250•M Walk & Bike
2,5W with min sound volume and low pulse frequency
8-10W with max sound volume and high pulse frequency
Models
2240•M Tram
7,5W when inactive and night option is activated
10,5W with max sound volume and high pulse frequency

G

The push front is pressure sensitive all over the front.
By pushing the front, you get a notification sound: Beep, as a response to your demand.
It’s possible to have 2 functions for the push front – direct push and/or extended push.
Extended push can be used to get extended green light time.

Push Front available for the following models
2100•L Walk
2110•L Walk
2200•M Walk
2210•M Walk
2250•M Walk & Bike
2310•S Walk
2315•S Walk
2320•S Bike
2325•S Bike
2330•S Walk & Bike
2335•S Walk & Bike

Even different functions can be programmed, for example
• Higher sound
• Spoken message
• Extended time for green light
• Sound and light notification
• To demand a green light
• Set up a different locating sound
• Activation of night option

Available for the following models
2100•L Walk
2110•L Walk
2200•M Walk
2210•M Walk
2250•M Walk & Bike

Hardware
Prisma Daps 2000 is made of aluminum housing – which means a long-life expectancy.
The electronics are compactly mounted inside an inner protective profile so that it can be removed and maintained easily.
The electronic push front is highly touch sensitive and with no moving parts.
Prisma Daps is vandal proof and practically impossible to destroy.

Software
A monitoring system continuously measures the signals coming from the traffic head light to guarantee that the Prisma Daps will never sound green during red phase.

Buying products from PrismaTibro, Sweden is a safe investment which is designed and made to last.

-40 to +70 °C
-40 to 158° F

5 year